€0.00
Exa FSD 150/50M-A R dirty water submersible pump with float
- Capacity: 27.0 m3/hour
- Head: 9.0 meters
- Dirt passage: 35mm
- 230 Volt
- 1.100 Watt
- With float
Description
The FSD 150/50M-A R is an industrial submersible pump with cast iron vortex impeller, stainless steel 416 pump shaft and over-sized bearings. The pump is designed for contaminated water with solid (and abrasive) components up to 35mm.
This Italian powerhouse is equipped with a mechanical silicon carbide/alumina seal plus a radial lip seal (oil seal) and the engine runs in an anti-oxide oil bath for extremely reliable operation.
The pump is equipped with a 10 m rubber H07RNF cable as standard, a reliable float and is equipped with a thermal protection.
Product Details
- Power
- 1,100 Watt
- Discharge connection
- 2"
- Head (m)
- 9,0 meter
- Flow rate (m³/h)
- 27,0 m3/uur
- Solids passage (mm)
- 35 mm
- Max. temperature (°C)
- 60°C
- Length (cm)
- 22,5 cm
- Width (cm)
- 16,4 cm
- Height (cm)
- 37,7 cm
- Weight (kg)
- 19,0 kg
- Impeller
- Cast iron
- Pump shaft
- Stainless steel 416
- Pump body
- Cast iron
- Capacity: 27.0 m3/hour
- Head: 9.0 meters
- Dirt passage: 35mm
- 230 Volt
- 1.100 Watt
- With float