MAC3 AGMA W dirty water float switch, vertical, 5 m cable
- Vertical dirty water float switch
- 5 metre cable
- Adjustable switching point
- For small sumps and cellars
- Optional piggyback plug and bracket
Since 2012
Free shipping · NL from €100 · BE/DE from €200
In stock: ships within 1-2 business days
Description
The MAC3 AGMA W is a vertical level switch for dirty water, with a 5 metre cable. It works with two loose floats that move up and down along a vertical guide. This means it needs very little room to switch, unlike a standard tilting float switch that has to swing freely. That makes the AGMA W suitable for small sumps, cellars, crawl spaces and lift pits.
How the switching point works:
- Switching on: the pump starts when the water reaches halfway up the upper float.
- Switching off: the pump stops when the water has dropped to halfway down the lower float.
- Adjusting: you change the on and off levels by moving the floats. Set the upper float higher to make the pump start later, or the lower float lower to pump the sump further down. The greater the distance between the floats, the less often the pump cycles.
Because the floats sit loosely around the guide, the AGMA W is less sensitive to dirt, sludge and fibres than float switches with a closed housing. It is still advisable to check and rinse it regularly so the floats keep moving freely.
The float switch is supplied with a 5 metre cable. As an option, we supply it with a piggyback plug: you plug the pump into the float switch plug, and the float switch controls the pump directly without extra wiring. A mounting bracket is also available to fix the float switch easily to the sump wall or the discharge pipe.
Product Details
- Material
- Kunststof
- Vertical dirty water float switch
- 5 metre cable
- Adjustable switching point
- For small sumps and cellars
- Optional piggyback plug and bracket