FKP P4 Q40/12
- 4″ borehole pump
- 400 V
- 3,0 kW
- 27,0 m3/hour
- 69 meters
Since 2012
Free shipping · NL from €100 · BE/DE from €200
Description
4″ borehole pump made of stainless steel 304 with Delrin impellers on a ceramic support bush, allowing this pump to run dry without issues. Suitable for installation in wells with a minimum (internal) diameter of 100mm. Sand-resistant up to 250g/m3, making it suitable for wells that produce some sand. This pump delivers the maximum capacity that a 4" borehole pump can provide.
To achieve this high capacity, this pump is designed WITHOUT AN INTERNAL CHECK VALVE. If you require a check valve in the line, we recommend installing a 3″ valve.
This pump runs on three-phase power! The cable can be extended upon request. The length determines the diameter of the cable.
Included in delivery
- pump with motor
- manual
Advantages of a borehole pump
- silent
- out of sight
- frost damage is impossible
- no leaking seals
- no issues with low water levels
Performance Curve
| m3/uur | 0,0 | 9,0 | 12,0 | 15,0 | 18,0 | 21,0 | 24,0 | 27,0 |
|---|---|---|---|---|---|---|---|---|
| meters | 69 | 57 | 51 | 45 | 40 | 33 | 23 | 11 |
Product Details
- Voltage
- 400 V
- Power
- 3,0 kW
- Discharge connection
- 2"
- Head (m)
- 69 meter
- Flow rate (m³/h)
- 27,0 m3/uur
- Pump shaft
- Stainless steel 431B
- Pump body
- Stainless steel 304
You might also like
- 4″ borehole pump
- 400 V
- 3,0 kW
- 27,0 m3/hour
- 69 meters