The Brio Top 2.0 digital press control is a flow switch that switches the pump on or off fully automatically based on pressure. In other words, when a tap or valve is opened and a pressure difference occurs in the pressure line, your pump is switched on and as soon as a tap/valve is closed, your pump is switched off again.

The switch protects the pump against dry running, overvoltage, frost and is equipped with an anti-lock protection that starts your pump briefly every 24 hours to ensure that the impeller does not get stuck due to deposits. The starting pressure can be set via the digital display.

You can run 2 pumps in combination with 1 pressure vessel using the master/slave function. In addition, there is also 1 incoming external connection for a float or a timer and also 1 outgoing external connection to switch another relay, for example.

Suitable for centrifugal pumps and submersible pressure pumps up to 3 HP (16 Ampere). Can be mounted both horizontally and vertically. Connection 1 1/4" external thread. Minimum capacity 2.5 ltr./min. Maximum capacity 18 m3/hour at maximum pressure 10 bar and 230 Volt. European top quality!

Please note: this product is supplied unwired!